P M T
News at PMT

Extended cross braces and new standards for cross brace connectors

Larger modules - better cross struts: We have extended our cross struts

15 January 2021 | 14:32
Wehave expanded our cross struts to meet the demand for larger modules.

Please note that due to the variety of the new cross braces, there may be a shortage of stock. We therefore ask you to plan ahead when using larger modules in order to avoid a possible delay in delivery.

We have also optimized our cross strut connector type 390 and provided it with larger perforations. The article number has therefore changed from 52215-1390 to 52215-1390-01. The functionality of the existing cross braces has not changed, so you are welcome to use up the remaining stock.

To the article overview Cross struts
Quotes
"What is still standard today? Technical innovations inspire our further development. We want to set new standards with our products. This is how we shape progress with the greatest possible safety and quality."
Peter Grass, CTO.
Peter Grass
CTO
News at PMT

100% safety with our new cable duct covers

We have optimized our cable duct covers to enable even safer and faster installation.

07 January 2021 | 15:11
ThePMT cable duct covers were previously installed in such a way that three components (two main floor profiles and one connecting floor profile) were covered. In practice, however, it became apparent that some cable duct covers had become detached from the profiles. With the new cable duct covers, these are now only clicked onto the connecting floor profile.

The cover ends just before the main floor profiles so that unevenness on the roof or even slight movements of the profile strand cannot cause the covers to come loose.

News at PMT

You will find these new articles in the Solarprotool from 2021

New articles from 2021 in the Solarprotool PMT Plan.

01 January 2021 | 13:51
Newly implemented articles will be available to you in Solarprotool from the beginning of 2021. You may need to enter the following articles in your company and in Solarprotool. We will inform you separately as soon as the new articles are ready for planning.

In order to be able to present the advantages and special features of the newly implemented articles to you in the best possible way, we are planning corresponding training courses, probably from February 2021. You will also receive further information on these.

All new articles at a glance:
  • Material support 3rd rail
    Note: The 3rd rail must not take any ballast
  • Ballast trays
  • Flex connector in module direction
  • Cross brace connector 1180 curved
  • Mounting feet and accessories (Solmont connection)
  • USO assembly (U-profile for connection to mounting foot)
  • USO individual parts
Here you will find all articles in a detailed overview
Back to top